nov10

cover11-10
title

Story:Randy Holden
Photos: Rob Wolf
Photographed on Mopowered Tour
Reprint from Mopar Collector’s Guide Magazine, November 2010

chevelle

d

ack in September 2009 issue of MCG, we featured some concept art by Murray Pfaff and a few photos of a ‘Cuda being melded together by well-known Mopar wild man Troy Brumbalow. Over the course of the last several decades, Troy’s made a name for himself by thinking outside of the box when it comes to his Mopar rides. Years ago, he built a Viper motored ‘Cuda, then when that wasn’t exciting enough anymore, he bolted together a 542″ blown Road Runner. That kept Troy busy and entertained for a while, but as always, Troy’s constantly planning the “next” car even long before he’s finished putting together his “current” car. And, as is pretty much par for the course with Troy, four years ago

he started thinking he wanted to build an extremely radical ‘Cuda that would be a daily drivable version of those little die-cast “Muscle Machines” car – you know, the one with the gigantic tires and even bigger engines. The idea of making a “toy” car into a real car kept coming back to the forefront of Troy’s wildly imaginative mind, and before long, he’d located a ’71 plain vanilla 318 Barracuda body that needed a fair amount of help. This would serve nicely as the starting point for a project that few even more out-of-control than Troy would’ve imagined. But then, again, how many of us have started on project cars then had things get out of hand? Honestly, it seems like that kinda’ goes along with being a Mopar guy.
All that aside, it was four years ago

that Troy hauled the some-what derelict old Barracuda over to this friend B.J. Fisher at Genesis One Automotive. B.J.’s been a close comrade of Troy’s for ages and he’s helped him put together just about every car he’s ever built, so they know each other well enough to figure out what the other’s thinking. Having a friend like that, who can also do phenomenal bodywork and chassis building, is a serious blessing indeed. So, the guys talked, they bounced some ideas off each other, and in the later part of 2006, B.J. grabbed his torch and started cutting the Plymouth to pieces. Right off the bat, the plan called for reworking some of the car’s skin to give it more personality – it would be smoother, the panels would curve inward in a slightly more

Page Two

TH400_mech_flat

dramatic fashion, and so forth. With the body on a jig in his shop, this allowed for the guys to do a lot of trial and error work, cutting, welding, stretching, contouring, smoothing, and generally messing with the body just about every week. They weren’t exactly sure what they were after, but both of them knew they would know it when they saw it.

As all of this welding, hacking, and re-welding was going on, B.J. studied on what to do about planting the reworked to the ground. After a lot of careful research, they decided on a completed Art Morrison chassis kit that’s intended for guys running Super Comp door slammer, or some such thing as that. The

title
title

Page Three

elaborate tube chassis arrived at the shop in the spring of 2007, and for the next several months, B.J. once again went about the task of placing a uniquely sculpted body onto a tube chassis he was modifying day-by-day. Needless to say, there was a lot of test fitting the body onto the tubes as the months went by, and with each effort, either the body or the chassis was changed around to make everything fit and line up correctly. And, as all this was going on, Troy began mocking up the motor that was to come. The boys placed an aluminum Hemi block in the chassis then experimented with blowers and intakes until Troy was satisfied he had the most cartoonish engine possible that would actually be capable of running an be dependable enough to drive on a fairly regular basis. Which brought us into the later part of 2007 and the critical stage of the operation, where everything was roughed together, but no plans were finalized and the whole project still lacked a centralized theme or direction. So, Troy turned to this friend and car-designing wizard, Murray Pfaff. Armed with a handful of photos of the car, the first thing Murray said was something like, “Wow, that thing looks like Frankenstein.” With all the bare metal and burned weld marks and seams all over the place, he was quite right. This thing looked like a patchwork quilt made out of steel that had been

shaped into the form of ‘Cuda. From that moment on, the “Frankencuda” moniker was affixed to the project.
Murray started getting ideas rapid fire about what to do with the rolling shell, but he wasn’t getting his ideas across to Troy. He started talking about painting on a gigantic caricature of the Frankenstein monster on the roof and having the artwork spread all across the upper surfaces of the car. Honestly, Troy tells us he thought Murray was nuts. All he could envision was the old custom van stuff from the later seventies, where all sorts of crazy graphics were air brushed onto vans and cleared over. Did Murray really think this thing needed some big air-brushed scene out of a horror movie splayed all across the roof? Yuck! That was hardly what Troy was after. Still, he knew Murray Pfaff well enough to realize there had to be something he didn’t understand, so Murray said he’d do some artwork and he could have a look. Once the graphics were laid on the table, everything became clear, and Troy realized, yet again, what an absolute genius this guy is. The idea was to paint all the graphics across the top of the car using a boatload of masking and layering the paint to create a skateboard-like mural of a Frankenstein monster with spark plugs and other car related themes pulling together with the ‘Cuda. Once Troy saw the artwork and understood the

concept, his entire attitude changed – now something like this would definitely stand out from the crowd at any car show or cruise night function, so, Murray, B.J., and Troy all sat down together, went over the artwork, and once they were all together on the same page (literally), work pressed forward.
As B.J. worked his magic on the body and chassis, a dummy Hemi was placed in the engine bay for test fitting and Troy got on the phone with the guys at Hensley Racing in Knoxville to discuss building one of the most monstrous Hemis currently being driven on the street. Troy wanted something over-the-top, and over-the-roof, for that matter. He wanted massive horsepower that would be awe inspiring to behold and still be capable of being driven regularly on pump gas, support an air-conditioning system, and spin an alternator to run modern electrical convenience – nothing like asking for the moon, eh? What they came up with was a Hemi that’s five-feet-tall from its oil pan to the polished scoop atop the carbs. The unfinished dummy motor stayed in the chassis until work was pretty well done, but what you’re looking at now is certainly no dummy. Hensley Racing built this one in-house using an Indy Mega Block, Indy aluminum heads, and an Indy intake. The motor displaces 636″ and the pressurized air

Page Four

pic5

a destroyed fender, grille, hood, front bumper, and lots of other odds-and-ends on the north end of the ca that were damaged. Before its first public outing, four years of work had been nearly wiped out in seconds.

Troy hauled the ‘Cuda home, yanked the front cap off, and once again, he and B.J. went over everything up front to make sure all was put back exactly as it should’ve been. Jeff did some more paint-work, and once again, serious trashing ensued because Troy was now determined to debut his toy at the 2010 Power Tour. This time, the trailer was gonna’ stay home – he wanted to drive his monster.

Sure enough, the car was finished up the day before he left for the Power Tour, and Troy made about 1,000 miles on the Tour before he had to head back for home because real life needed his attention. Imagine though, this radical machine that looks like a show poodle actually rolled up over 1,000 miles in a couple of days, all the while with the air conditioning on and the

elaborate tube chassis arrived at the shop in the spring of 2007, and for the next several months, B.J. once again went about the task of placing a uniquely sculpted body onto a tube chassis he was modifying day-by-day. Needless to say, there was a lot of test fitting the body onto the tubes as the months went by, and with each effort, either the body or the chassis was changed around to make everything fit and line up correctly. And, as all this was going on, Troy began mocking up the motor that was to come. The boys placed an aluminum Hemi block in the chassis then experimented with blowers and intakes until Troy was satisfied he had the most cartoonish engine possible that would actually be capable of running an be dependable enough to drive on a fairly regular basis. Which brought us into the later part of 2007 and the critical stage of the operation, where everything was roughed together, but no plans were finalized and the whole project still lacked a centralized theme or direction. So, Troy turned to this friend and car-designing wizard, Murray Pfaff. Armed with a handful of photos of the car, the first thing Murray said was something like, “Wow, that thing looks like Frankenstein.” With all the bare metal and burned weld marks and seams all over the place, he was quite right. This thing looked like a patchwork quilt made out of steel that had been

shaped into the form of ‘Cuda. From that moment on, the “Frankencuda” moniker was affixed to the project.
Murray started getting ideas rapid fire about what to do with the rolling shell, but he wasn’t getting his ideas across to Troy. He started talking about painting on a gigantic caricature of the Frankenstein monster on the roof and having the artwork spread all across the upper surfaces of the car. Honestly, Troy tells us he thought Murray was nuts. All he could envision was the old custom van stuff from the later seventies, where all sorts of crazy graphics were air brushed onto vans and cleared over. Did Murray really think this thing needed some big air-brushed scene out of a horror movie splayed all across the roof? Yuck! That was hardly what Troy was after. Still, he knew Murray Pfaff well enough to realize there had to be something he didn’t understand, so Murray said he’d do some artwork and he could have a look. Once the graphics were laid on the table, everything became clear, and Troy realized, yet again, what an absolute genius this guy is. The idea was to paint all the graphics across the top of the car using a boatload of masking and layering the paint to create a skateboard-like mural of a Frankenstein monster with spark plugs and other car related themes pulling together with the ‘Cuda. Once Troy saw the artwork and understood the

CD and DVD players whirring away. And, Troy tell us the monster managed to get 7.5 mpg! Okay, so it’s not gonna’ win any fuel economy awards, but if he’d gotten a dollar from everybody who took a photo of the car along the way, it would’ve probably covered his fuel expenses.

So, the Frankencuda is now alive – it’s alive! Watch for this one running around the streets of Georgia, and you can bet you’ll see it at a number of major Mopar events in the coming years. Frankencuda will be featured at the 2010 MuscleCars at the Playboy Mansion event, and it’s been invited to be on display at the Mother’s Wax booth at the SEMA show in Vegas. All of which goes to prove, if you can dream it up, somebody out there can build it. Who would’ve thought a ‘Cuda that looks this radical could actually be a dependable driver?

We’re not telling Troy what to do next, but if we were in his shoes, we’d be highly inclined to do a Dracula-themed ’71 Challenger (perhaps in red-and-black) with a similar engine to keep this one company. What’s better than one monster E-body in the garage? Two monster E-bodies in the garage. In the meantime, hat’s off to Troy and everybody involved in making this amazing car a reality; you’ve really got to see it and hear it to appreciate fully what’s been done here. Whatever his course, we can’t wait to see what Troy’s probably already thinking about for his next car.